[Me...] Posted June 15, 2022 Share Posted June 15, 2022 Hallo Zusammen, hat jemand von Euch so eine Toleranzangabe gesehen ? Wie sollte das ausgewertet werden, was meint Ihr ? Danke !Linienform_CZ.JPG Link to comment Share on other sites More sharing options...
[Ün...] Posted June 15, 2022 Share Posted June 15, 2022 Common Zone: joint inspection of the characteristics in a common tolerance zone. GD&T_Poster_Datum Tol Modifiers_GPS.pdf Link to comment Share on other sites More sharing options...
[Me...] Posted June 16, 2022 Author Share Posted June 16, 2022 Was CZ bedeutet ist mir bekannt , aber wie soll die Auswertung aussehen ? Ø104 ±0,05 als Konturen-vergleich und Ø111 ±0,05 als Konturen-vergleich oder die Nutbreite Link to comment Share on other sites More sharing options...
[Ma...] Posted June 16, 2022 Share Posted June 16, 2022 Please sign in to view this quote. Two callouts - 1. for D104 and 2. for D111. Link to comment Share on other sites More sharing options...
[Me...] Posted June 16, 2022 Author Share Posted June 16, 2022 Please sign in to view this quote. Warum dann das "CZ" ? Link to comment Share on other sites More sharing options...
[Ma...] Posted June 16, 2022 Share Posted June 16, 2022 Well i don't know how part looks like, but when it's CZ there then this cylinder must be somewhere interupted ( by groove or something ) Link to comment Share on other sites More sharing options...
[Me...] Posted June 16, 2022 Author Share Posted June 16, 2022 Please sign in to view this quote. Man kann auf der Zeichnung erkennen das es zwei Ø sind ,wie das Teil aussieht ist nicht relevant . Link to comment Share on other sites More sharing options...
[Ma...] Posted June 16, 2022 Share Posted June 16, 2022 Because I don't see whole part ( idealy in 3D ) then I don't see if cylinder 104 or 111 isn't interupted by hole, groove or something. Otherwise is CZ not used ( CZ doesn't mean you have to check cylinders 104 and 111 as one element ) Link to comment Share on other sites More sharing options...
[Me...] Posted June 16, 2022 Author Share Posted June 16, 2022 Please sign in to view this quote. Bitte 3DLinienformCZ.pdf Link to comment Share on other sites More sharing options...
[Ma...] Posted June 16, 2022 Share Posted June 16, 2022 From that i don't see why is CZ used. I would ask customer to avoid miscommunication Link to comment Share on other sites More sharing options...
[Er...] Posted June 16, 2022 Share Posted June 16, 2022 This is my take. The diameters look like an O ring groove. If SZ were applied, each diameter independently would have a line profile of 0,1. With CZ applied the two diameters have a line profile of 0,1 to each other. Thus the diameters shall be within 0,1 of each other at all points around the diameters. It seems to be a fancy way of specifying a 3,5mm O ring groove. Link to comment Share on other sites More sharing options...
[Me...] Posted June 17, 2022 Author Share Posted June 17, 2022 Please sign in to view this quote. Hallo Erik, genauso siehe ich das auch, der Kunde kann nicht mehr kontaktiert werden. Allen beteiligten Dankeschön fürs Feedback ! Aber bin gespannt auf weiter Interpretationen Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in