Cone angle 15degree

[[An...]]

Hello all,

How do i measure the corn?

Thank you in advance

Capture.JPG

[[SH...]]

🙄

[[Ju...]]

You could try creating a 2d Line along the cone if you have a stable feature to compare it to and use Angle Between Features. This will give additional options for the angle evaluation.

(After posting, I realized that the second feature in the characteristic should be the datum, so I switched the two features in the program. So, Feature1 is now 2d Line2, and Feature2 is now DatumA.)

ConeAngle1.jpgConeAngle2.jpg

[[Ju...]]

If you don't have a feature to compare it to, you can also get the angle from the 2d Line.

ConeAngle.jpg

[[Mi...]]

- measure feature cone (use two circle patch strategy)
- check features for cone (cone1.png). AC is Cone Angle
- use characteristic (size - angle - half cone angle)
- open characteristic Half Cone Angle and insert feature Cone (cone2.png)

[[An...]]

I made it! Thank you so much

04052022_ziess.JPG

[[Jo...]]

Please sign in to view this quote.

I was just trying to understnd this, are these A1 and A2 lines axis lines in workplane can you explain them better to me?

[[Ju...]]

I should clarify that this is assuming the base alignment is parallel to the granite. Otherwise a result element could be used to adjust the rotation angle.

[[An...]]

Thank you all i got it !!