[Cl...] Posted March 2, 2022 Share Posted March 2, 2022 All of the sudden I hear three beeps when the first point of any feature is probed, or scanned. Any ideas why this is happening? Link to comment Share on other sites More sharing options...
[Ro...] Posted March 2, 2022 Share Posted March 2, 2022 Hi Clarke, Sounds like the setting in the jogbox got changed. There should be a menu item for sound on the jogbox with different settings for how many beeps it does. Link to comment Share on other sites More sharing options...
[Ro...] Posted March 2, 2022 Share Posted March 2, 2022 I've experienced that. If I remember correctly, I crashed and did a soft reset on the joystick box. After that, every time I probed something I would get the beep and immediately followed by two more beeps but they sounded different. I had to shut the CMM down and restart it for it to go away. Not sure if were are talking about the same thing but these are my 2 cents. Link to comment Share on other sites More sharing options...
[Ow...] Posted March 2, 2022 Share Posted March 2, 2022 I remember mysteriously hearing an Active scanning XT head beep 2 two times upon each touch before and a restart resolved it. 3 beeps though? - take two aspirin and call me in the morning. 🤣 Link to comment Share on other sites More sharing options...
[Cl...] Posted March 2, 2022 Author Share Posted March 2, 2022 Thanks, I'll give the re-boot a try. Link to comment Share on other sites More sharing options...
[To...] Posted March 3, 2022 Share Posted March 3, 2022 I've noticed that after I use ctrl-shift F10 to run the warm-up program, I start getting 2 different tones when probing. Goes away after re-starting. But I agree with Robert's post regarding a modification made to the settings in the joystick controller box. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in