[Me...] Posted March 1, 2022 Share Posted March 1, 2022 Hello everyone, I am looking for a solution to the following problem. I have an inspection plan, equal parts on 5 CNC centers. Normally no problem. However, log header parameters (operator, part number, machine number, etc., a total of 10 different parameters) must be edited for each CNC center, depending on which CNC center the parts come from. This should be avoided. My idea Just one measurement plan for these same workpieces. The operator selects his machine from a menu created in PCM and enters all 10 protocol header parameters once before the 1st measurement. The correct input parameters appear in the log header for the following measurements - no more input, only possibly machine and operator Does anyone know of a solution for this? Link to comment Share on other sites More sharing options...
[Da...] Posted March 1, 2022 Share Posted March 1, 2022 Or you you can use save as and rename each copy to include the machine number. Low tech but it works. Link to comment Share on other sites More sharing options...
[Ma...] Posted March 1, 2022 Share Posted March 1, 2022 You can create or copy buttons in autorun to make it for all machines - no need for duplicating measuring plan. Link to comment Share on other sites More sharing options...
[Er...] Posted March 1, 2022 Share Posted March 1, 2022 Please sign in to view this quote. Then use Autorun to have the operator pick a picture of their number. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in