[Ri...] Posted February 11, 2022 Share Posted February 11, 2022 Hey all, I had a part that I came across with a pretty complex hole position callout (mainly the lower tier) that I thought you guys might enjoy. I'm attaching a zip archive that has a sample drawing, and CAD model of a similar sketch that I made myself. I came up with a measurement plan that seemed to work well, but it was kind of a pain to do. I'd be interested to hear from the community on their thoughts on the drawing, and how they might go about inspecting this in Calypso. Happy Friday, and enjoy. Thanks.GD&T Test - 2-11-22.zip Link to comment Share on other sites More sharing options...
[SH...] Posted February 12, 2022 Share Posted February 12, 2022 Please sign in to view this quote. Where is the location of each holes?. No basic dimensions. Dimensions are clear in the drawing,i would go with best fit bore pattern. Link to comment Share on other sites More sharing options...
[Ri...] Posted February 15, 2022 Author Share Posted February 15, 2022 No Basic Dimensions, all CAD Model information. Link to comment Share on other sites More sharing options...
[To...] Posted February 15, 2022 Share Posted February 15, 2022 Please sign in to view this quote. Does BFBP work on a group of angled holes? Normally, an angled hole needs to have the axis of the coordinate system tilted normal to axis of hole, i.e. using the Special button or a secondary alignment. Link to comment Share on other sites More sharing options...
[SH...] Posted February 15, 2022 Share Posted February 15, 2022 Please sign in to view this quote. Create a cylindrical section in the cad model and have two sets of circles top and bottom then BFBP??? . Link to comment Share on other sites More sharing options...
[Ri...] Posted February 15, 2022 Author Share Posted February 15, 2022 Best Fit Bore Pattern is only 2d Position. You need to be able to perform a 3d Position. Link to comment Share on other sites More sharing options...
[Ri...] Posted February 15, 2022 Author Share Posted February 15, 2022 Please sign in to view this quote. No it does not. GOM Inspect has this really neat button that will automatically tilt the axis for you. Would be cool to have that in Calypso. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in