rotation slots distance + radius

[[Da...]]

Hi all,

I need to check the distance of those slot (they vary 4 x 90° or 3x 120° but this doesn't matter) the questions is :

I have done pattern on them and how do I output the distance ? Before I have not used pattern so I could used formula distance + circle radius but it just taking a lot of time. Any idea to do this quick please ?

[[Cl...]]

For plane to OD radii, use; Size > Distance > Caliper distance (between maximum).

[[Da...]]

Do not have that option in my Calypso 5.4 unfortunately.

[[Cl...]]

If you have curve you can scan the radii and use the min or max coordinate point for you distance from plane. So if that plane surface is X zero, you would pull the curve into the min/max coordinate and choose the X axis use min coordinate for the radius on the left and max coordinate for the radius on the right.