[s...] Posted February 9, 2021 Share Posted February 9, 2021 Hi, Does anyone know how to display the CMM in the window while programming offline? I used to be able to do this back in 4.3 or something close to that revision. Regards, Scott Link to comment Share on other sites More sharing options...
[No...] Posted February 9, 2021 Share Posted February 9, 2021 There's a button for this in the simulation window. You can show the stylus, the head and the CMM separately. No Calypso nearby right now, so I can't make a screenshot Link to comment Share on other sites More sharing options...
[Mi...] Posted February 9, 2021 Share Posted February 9, 2021 Link to comment Share on other sites More sharing options...
[Ke...] Posted November 30, 2021 Share Posted November 30, 2021 The CMM CAD/Simulation button is not available on my planner... I'm guessing that I need to upload a machine specific CAD model; which I recall being discussed on the forum, but I cannot find it. I'm looking for the CAD for an Accura II, and a Contura... and if instructions are available, that would be pretty sweet 😃 Link to comment Share on other sites More sharing options...
[To...] Posted November 30, 2021 Share Posted November 30, 2021 Not all machines are visible. Link to comment Share on other sites More sharing options...
[Ma...] Posted November 30, 2021 Share Posted November 30, 2021 Tom is correct. I am only able to display the table and rotary table, not the whole CMM Link to comment Share on other sites More sharing options...
[No...] Posted December 1, 2021 Share Posted December 1, 2021 First of all, you can't "upload" a machine model. Calypso comes with a predefined set of models. If the machine and measuring range you selected in the CMM settings matches an existing model, it can be displayed. Otherwise the best you get is a rudimentary representation of the table, probe etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in