[Ch...] Posted January 29, 2021 Share Posted January 29, 2021 I am trying to assist with an issue at our facility and opened our planner seat. For some reason the machine is inverted? When I tried to correct it by running a manual alignment, it said there were issues with Block Edges... 🙄 I changed it over to position points only and tried running the manual alignment again. This allowed me to fix it and corrected the axis issue, no more upside down world. However, the stylus is going THROUGH my work piece. Is there something going on with the Geometry Values for the styli I am using? I assumed when loading the SCC file it would automagically import the geometry, do I need to manually edit these? What in the name of Oden's raven is going on and how to I fix it?!? See the attached photo* Link to comment Share on other sites More sharing options...
[Ri...] Posted January 29, 2021 Share Posted January 29, 2021 There are two options: - CAD - Modification - CAD Model Transformation - Transform the model to the correct axis & position - Plannar - Measurement Plan Simulation - Modify CAD Model (bottom right button) - Transform the model to the correct axis & position Link to comment Share on other sites More sharing options...
[Me...] Posted January 29, 2021 Share Posted January 29, 2021 Please sign in to view this quote. Could it be the machine volume numbers being inverted when the tab was created? Link to comment Share on other sites More sharing options...
[Ch...] Posted January 29, 2021 Author Share Posted January 29, 2021 Thanks for the suggestions. I was able to amend the axis inversion, my other query is how to fix the misalignment of the stylus during simulation? Link to comment Share on other sites More sharing options...
[Ri...] Posted February 1, 2021 Share Posted February 1, 2021 Please sign in to view this quote. When you imported the SSC, did you create and import the MasterProbe first? Link to comment Share on other sites More sharing options...
[Ch...] Posted November 19, 2021 Author Share Posted November 19, 2021 I'll give the importing the Master Probe initially a try to see if that fixes my problem. Thanks for feedback and suggestions!!! Link to comment Share on other sites More sharing options...
[Ri...] Posted November 22, 2021 Share Posted November 22, 2021 I had a very similar issue on my offline seat. it had a direct relation to "System settings CMM Configuration" values. I ended up having Zeiss remote in to the PC and fix the issue.Untitled.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in