[Pa...] Posted November 17, 2021 Share Posted November 17, 2021 From my customers, they like to measure depth with ‘step point construction ’，I am an offline programmer, I cann't do test to know how accurate. Is there anyone know a lot about this? Link to comment Share on other sites More sharing options...
[To...] Posted November 17, 2021 Share Posted November 17, 2021 Offline is tough to verify but I have used step point with good success. Link to comment Share on other sites More sharing options...
[Cl...] Posted November 17, 2021 Share Posted November 17, 2021 Please sign in to view this quote. I used this once with good success. We sectioned the part and were able to verify what Calypso reported. Link to comment Share on other sites More sharing options...
[Er...] Posted November 17, 2021 Share Posted November 17, 2021 I have a little experience with it. I have always had to dial it in to compensate for the manufacturing process. Once dialed in to the process it was accurate. Stylus radius, tooling radius, whether they chamfer it, surface finish, etc. all play a part. Link to comment Share on other sites More sharing options...
[Ri...] Posted November 18, 2021 Share Posted November 18, 2021 Online, Step points work very well. Offline, Step points don't help you at all. If only Calypso had a "Follow" CAD features when you Placed a line on the multi surfaces. Like FreeForm... Why cant we use FreeForm in a Step point? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in