[Ke...] Posted June 16, 2021 Share Posted June 16, 2021 Inspecting flexible plastic: I have the force set to 50Mn. How low can the force setting be? What other settings make sense, to ensure that I am not flexing the part, during measurement? Link to comment Share on other sites More sharing options...
[Ow...] Posted June 16, 2021 Share Posted June 16, 2021 Seems like this was discussed recently so you might search for more details. If you're using a Vast scanning head there's a setting in measurement plan editor for Elastic Parts Force . I've never used it but, I believe it's supposed to take two or more points to see if the part moves to determine force???. Good luck. Link to comment Share on other sites More sharing options...
[Ke...] Posted June 16, 2021 Author Share Posted June 16, 2021 Please sign in to view this quote. Yeah, I saw that discussion on the Elastic Parts setting... not sure if that applies to scanning though. Link to comment Share on other sites More sharing options...
[Ow...] Posted June 16, 2021 Share Posted June 16, 2021 Sorry Keith, I should have read your post better. Hopefully somebody chimes in. Link to comment Share on other sites More sharing options...
[No...] Posted June 17, 2021 Share Posted June 17, 2021 I never use it, but that setting seems to be for touch points only. It takes two points with different forces and calculates back to force zero. No idea how to handle scanning... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in