[Me...] Posted May 26, 2021 Share Posted May 26, 2021 I'm seeing an issue when measuring a Ø .125in bore with a .050in probe. It seems to be retracting right after the retract I've placed and crashing through the part. The hole is on a 12 degree angle, I'm coming down in the Z+ axis and measuring about half the hole. I've done this countless times and proved it out on an actual machine yesterday but Planner isn't having it. Anyone have any ideas for a solution? Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/ Share on other sites More sharing options...
[To...] Posted May 27, 2021 Share Posted May 27, 2021 are you measuring a circle or cylinder? If a circle, does your A1 or A2 reflect the 12 deg angle? What are your clearance distance and retract values? Is it possible that the feature is way off in location? Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64690 Share on other sites More sharing options...
[Me...] Posted May 27, 2021 Author Share Posted May 27, 2021 Please sign in to view this quote. I've verified that the model is correct. Probe Diameter - 0.8mm Clearance Group - CP +Z Clearance Distance - 2.000in Retract Distance - .020in Measure Strategy: 4 Single Points Start Angle - 120 Angle Range - 130 X nominal location is .00266in off Y nominal location is .00176in off Diameter nominal is .19445in off 12 degree angle reads perfect. I've measured a million angled holes with Planner and do not remember seeing this. Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64692 Share on other sites More sharing options...
[To...] Posted May 27, 2021 Share Posted May 27, 2021 Please sign in to view this quote. Any chance the ID/OD switch is not set correctly? Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64694 Share on other sites More sharing options...
[Me...] Posted May 27, 2021 Author Share Posted May 27, 2021 Please sign in to view this quote. Good call but nah it's showing ID. 🙁 Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64696 Share on other sites More sharing options...
[Ja...] Posted May 27, 2021 Share Posted May 27, 2021 In your strategy, clearance settings, do you have move to clearance plane set to "before and after measuring". I am sure it is by default but just to check. Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64698 Share on other sites More sharing options...
[Me...] Posted May 27, 2021 Author Share Posted May 27, 2021 Please sign in to view this quote. Yes, it's defaulted Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64700 Share on other sites More sharing options...
[Me...] Posted May 27, 2021 Author Share Posted May 27, 2021 I think I figured it out. Is there a reason CAD Model would be checked under Point Transfer in the simulation settings? I turned it off and it's not doing the extra retract... Link to comment https://qualityforum.zeiss.com/topic/12832-calypso-2017-service-pack-9-planner-issue/#findComment-64702 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in