[SH...] Posted April 1, 2021 Share Posted April 1, 2021 Is there is any option to control the default speed, at the moment I have it 300mm per second. I want to maintain it 20mm per second. Reason- l have to work with 1mm probe and 0.5mm lot of time , when I create a new program , during dry run I forget about speed, sometime probe hit with job and cause probe broken.So my default speed is slow I can save lot of probes 🙂 🙂 Link to comment Share on other sites More sharing options...
[Ch...] Posted April 1, 2021 Share Posted April 1, 2021 See attached ... Also if you have PCM you can change per feature with setInspectionDrivingSpeed(20) [ 20 = mm/s ]20mms.PNG Link to comment Share on other sites More sharing options...
[SH...] Posted April 1, 2021 Author Share Posted April 1, 2021 Please sign in to view this quote. Iam sorry to say that, I don't have PCM. Link to comment Share on other sites More sharing options...
[Da...] Posted April 1, 2021 Share Posted April 1, 2021 You can go to Resources\ Feature settings editor\ (Use drop down menu) Travel\ Speed. You can set the desired speed for each feature or for the entire program. Link to comment Share on other sites More sharing options...
[SH...] Posted April 1, 2021 Author Share Posted April 1, 2021 Please sign in to view this quote. Please understand, iam asking about default option without individual setting in each time. During my two and half years experience in calypso I already broken six probes only because of my short term memory loss 😂😂 Link to comment Share on other sites More sharing options...
[Me...] Posted April 1, 2021 Share Posted April 1, 2021 Please sign in to view this quote. Link to comment Share on other sites More sharing options...
[Te...] Posted April 1, 2021 Share Posted April 1, 2021 You can go to measurement plan editor features/travel/speed and change the speed to 20mm per second. If you do that and leave your speed on the run screen to 200 it will move at 20mm per sec once inside the clearance cube at the clearance distance if you have it at anything other than 0.000. If you have a clearance distance of zero after a stylus system change it will rapid in X and Y but the 20mm per sec will start then and the Z with move really slow. Link to comment Share on other sites More sharing options...
[To...] Posted April 1, 2021 Share Posted April 1, 2021 Please sign in to view this quote. You could probably do it if you created a template program. There is an option under Plan > Preassign Start Values. Here you can set it up to whatever settings you want to use. Unfortunately, since you can't remember to turn down the speed, I'm guessing you won't remember to use the template program when you start a new program. 🤣 Link to comment Share on other sites More sharing options...
[Cl...] Posted April 1, 2021 Share Posted April 1, 2021 I boxed professionally so I can totally relate, short term memory go bye, bye. Link to comment Share on other sites More sharing options...
[Te...] Posted April 1, 2021 Share Posted April 1, 2021 What probing dynamic are you using for you less than 1mm probes? I use 50% for 0.5mm to 0.8mm and for 0.3mm stylus I use 5% if I only have 1 or 2, but if I have a good supply I use 30%. Link to comment Share on other sites More sharing options...
[To...] Posted April 1, 2021 Share Posted April 1, 2021 Please sign in to view this quote. Corrugated or paperboard? Link to comment Share on other sites More sharing options...
[Cl...] Posted April 1, 2021 Share Posted April 1, 2021 🤣 Link to comment Share on other sites More sharing options...
[Ja...] Posted April 1, 2021 Share Posted April 1, 2021 I agree with the creating a templet idea. You will find it beneficial for many other things too. I found myself going through a list of things to set and creating reports every time I created a program so I just made a template program. Link to comment Share on other sites More sharing options...
[SH...] Posted April 5, 2021 Author Share Posted April 5, 2021 Please sign in to view this quote. Yes, not always but some pressure situation. I will try it anyway, thanks. Link to comment Share on other sites More sharing options...
[Je...] Posted April 5, 2021 Share Posted April 5, 2021 . . . Please sign in to view this quote. Only SIX probes? Rookie. . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in