[To...] Posted March 5, 2021 Share Posted March 5, 2021 Does anyone have a suggestion on how to get a line profile on the section in the box on an O-Inspect using the camera?Capture_LI.jpg Link to comment Share on other sites More sharing options...
[Cl...] Posted March 5, 2021 Share Posted March 5, 2021 For something like that I would use a 2d curve. If you need me to elaborate on that, let me know. Link to comment Share on other sites More sharing options...
[To...] Posted March 5, 2021 Author Share Posted March 5, 2021 Well, I have created 2d lines and radii and recalled those features into a 2d curve. That is the only way I know how to do it. Please do share your thoughts, Clarke. Link to comment Share on other sites More sharing options...
[Cl...] Posted March 5, 2021 Share Posted March 5, 2021 Do you have a model? Section the model (CAD - Creating Features - Section tab) in (Z normal vector 1) were you want he curve. Adjust the size, so it only captures the specific area you want, click "Section". Open the creation tab, click on the curve to highlight it and click "Curve". Once you have the curve, increase the nominal points x3 (minimum). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in