[Cl...] Posted February 10, 2021 Share Posted February 10, 2021 I've noticed that if I use a secondary alignment for a true position characteristic, I get one result. If I populate that same characteristic with the same three datum's, I sometimes get a slightly different result. Why is this? Link to comment Share on other sites More sharing options...
[To...] Posted February 10, 2021 Share Posted February 10, 2021 It is possibly that you have your Outer Tangential and ISO 5459 settings active when you select your datum features and your secondary alignment is defaulting to LSQ and not constrained to ISO 5459 Link to comment Share on other sites More sharing options...
[Cl...] Posted February 10, 2021 Author Share Posted February 10, 2021 Thanks, yes I do. Link to comment Share on other sites More sharing options...
[Ri...] Posted February 10, 2021 Share Posted February 10, 2021 DRF follows the can-may-must rule. Alignments do not unless you are selecting the features off the model. Link to comment Share on other sites More sharing options...
[Cl...] Posted February 10, 2021 Author Share Posted February 10, 2021 Please sign in to view this quote. Very informative article on this subject https://www.qualitymag.com/articles/888 ... on-process Link to comment Share on other sites More sharing options...
[An...] Posted February 10, 2021 Share Posted February 10, 2021 _ Link to comment Share on other sites More sharing options...
[Ri...] Posted February 10, 2021 Share Posted February 10, 2021 Please sign in to view this quote. Lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in