Unknown Vmax setting

[[Me...]]

After shutting down a Navigator for the weekend, we had a never before seen Vmax formula show up in the speed selection of the Start screen when we restarted. Don't know how it got there. It looks like this----vMAX [Act. vMAx=70].
We are now stuck at a max speed of 70mm/s. Can't get rid of or override it. How can we get this deleted.?

Thanks

[[Mi...]]

Check the position of the key at the control unit. If it is set on manual, speed limit ist 70mm/s.

[[No...]]

Have you checked the key switch at the controller? --> must be set to AUTO

The meaning of the "formula" is that the measuring plan was originally programmed with a different (higher) speed setting than is supported on the machine it's currently opened on. For example, when I program on our offline seat, I usually set speed to 160 (what we use on our Contura). If I open it on our old MC it reads "160 [Act. vMAX=120]"

[[Me...]]

I was off for a day.

Thanks--key position was the answer.

[[To...]]

This happened somewhat recently to me, as well. Turning the key solved this problem for me, as well. Does anyone know if this happened due to an automatic software update? I can't think of any other reason as to why this would have happened out of the blue on 2 different machines here. As far as I know, nobody changes that key position for any reason, so it seems that this setting should've always been active.