[Ja...] Posted August 11, 2020 Share Posted August 11, 2020 Would datum B, in this instance, be the individual hole, or the pattern? The leader line is pointing to the individual, but "8x" is mentioned in the callout. If it IS the individual, that will clock my alignment to that hole, which doesn't make much sense given the other callouts on the print. Thank you everyone!IMG_20200811_160626325~2.jpg Link to comment Share on other sites More sharing options...
[To...] Posted August 12, 2020 Share Posted August 12, 2020 In my opinion, it would be the best fit pattern of all 8 holes. Link to comment Share on other sites More sharing options...
[Da...] Posted August 12, 2020 Share Posted August 12, 2020 What Tom said -> if ASME. In ISO that would be individual as it is, if "CZ" is added in second compartment, then pattern (I'm not certain about best-fit, but probably yes). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in