[An...] Posted August 1, 2020 Share Posted August 1, 2020 Please sign in to view this quote. Right! An error has occured in calculation of data. See attached.Contribution_01_08_2020_a.xlsmKorrektur_1.pdf Link to comment Share on other sites More sharing options...
[Da...] Posted August 2, 2020 Share Posted August 2, 2020 I would do this: 1. Measure as surfaces 2. Recall feature points into a torus 3. Recalculate nominal geometry 4. Improve the results by iterating the recall/recalculate 5. Calculate the outer diameter by adding the subsidiary diameter to the main diameter of the torus or use the outer tangential element if available 6. Verify by other means (caliper/micrometer) 7. Validate by making an R&R study Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in