[Cl...] Posted June 24, 2020 Author Share Posted June 24, 2020 "1" is the stylus. "1.0MM_Z" is the stylus system. getProbe("1","1.0MM_Z").stdProbeDev/25.4 Link to comment Share on other sites More sharing options...
[Tr...] Posted June 24, 2020 Share Posted June 24, 2020 Please sign in to view this quote. Do I have to add formula for nominal also? numbers still don't seem rightresult element.jpg Link to comment Share on other sites More sharing options...
[Cl...] Posted June 24, 2020 Author Share Posted June 24, 2020 You have to put in the quotes and comma. Exactly as shown. getProbe("1","1.0MM_Z").stdProbeDev/25.4 getProbe(:1","1.0MM_Z").radius Link to comment Share on other sites More sharing options...
[Tr...] Posted June 25, 2020 Share Posted June 25, 2020 Ahh! Yup that's all that was missing! 🤣 Thanks so much!! Link to comment Share on other sites More sharing options...
[Me...] Posted June 25, 2020 Share Posted June 25, 2020 I put a size tolerance through result element on my MasterProbe as well and depending on the humidity, I'll get something like a .00002 inches difference when re-referencing the sphere for various calibrations. Would you fine folks say this may be redundant do to the fact that we're only supposed to use the MasterProbe to calibrate? I'm thinking about taking this out of my Cal program is all... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in