[SH...] Posted June 19, 2020 Share Posted June 19, 2020 I have a profile for a slot feature in my casting drawing. What feature should I select for this?. I created a slot but calypso didn't take it as a feature for profile, I think a 3D feature required for profile. In my cad model two radius side have cones and flat side have planes. I have curve but lam that much familer with curve. Should I go for a 3D curve??IMG20200619164014.jpg Link to comment Share on other sites More sharing options...
[Ma...] Posted June 19, 2020 Share Posted June 19, 2020 Have you try to measure a groove at different depths? and then point recall in 3d-curve? Link to comment Share on other sites More sharing options...
[SH...] Posted June 19, 2020 Author Share Posted June 19, 2020 Please sign in to view this quote. No, good Idea ,I will try Link to comment Share on other sites More sharing options...
[Cl...] Posted June 19, 2020 Share Posted June 19, 2020 I'm guessing that you are measuring that in the XY work plane? Slice through the model to create at least two 2d curves around the slot, and recall the points into a FFS for evaluation. Link to comment Share on other sites More sharing options...
[Ia...] Posted June 19, 2020 Share Posted June 19, 2020 Please sign in to view this quote. Does there happen to be a guide/tutorial on how to slice the model? Link to comment Share on other sites More sharing options...
[SH...] Posted June 19, 2020 Author Share Posted June 19, 2020 Please sign in to view this quote. I don't have free form surface 😠Link to comment Share on other sites More sharing options...
[SH...] Posted June 19, 2020 Author Share Posted June 19, 2020 Please sign in to view this quote. This is not working, can't select the 3D curve. Link to comment Share on other sites More sharing options...
[SH...] Posted June 19, 2020 Author Share Posted June 19, 2020 Please sign in to view this quote. https://youtu.be/wDnvcBvC970 Link to comment Share on other sites More sharing options...
[SH...] Posted June 19, 2020 Author Share Posted June 19, 2020 Please sign in to view this quote. How can I change the nominal value of my profile, I get wrong nominal value in the piweb report.. Link to comment Share on other sites More sharing options...
[Cl...] Posted June 19, 2020 Share Posted June 19, 2020 I'm not quite sure what you are asking? The nominal should be 0.000. Link to comment Share on other sites More sharing options...
[SH...] Posted June 19, 2020 Author Share Posted June 19, 2020 Please sign in to view this quote. My 2D curve co ordinate value related to base alignment in y axis 55 and x axis zero, when I created a slot its value is correct, but in curve it shows wrong, I don't know where I made the mistake.. Link to comment Share on other sites More sharing options...
[Cl...] Posted June 19, 2020 Share Posted June 19, 2020 Did you have this box checked (Re-calculate Nominal Geometry), when you recalled the points into the slot? Try creating it again, this time with that box in-checked. That may be your problem, not 100% sure. Link to comment Share on other sites More sharing options...
[SH...] Posted June 22, 2020 Author Share Posted June 22, 2020 Thanks for all the reply, customer has changed the Profile to true position... 😃 😃 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in