Machine Shut Down

[[Ke...]]

So yes my machine shut down in the middle of the run and this error popped up.

I do not know what the "emergency stop chain" is and my air pressure is 74psi

Anyone have any ideas?

[[Ro...]]

Air pressure at 5 bars?
Its tough to diagnose when the pressure dips under 4.7 for just a moment when something on the shop floor draws a big volume, because by the time the machine flakes out and you go around to take a look the pressure is back up to 5 and you have no idea what happened.

[[Ke...]]

Please sign in to view this quote.

I shut off the software and machine and it took about 10 minutes before pressing the drives button and it would turn them on
I am up and running now Air pressure is still 74psi. We did just get a new machine I wonder if it is drawing a ton of air when they start it up.... food for thought

[[Da...]]

I had a similar issue a while ago.

The drives would cut out at random, and I could always get them back up essentially right away.

The problem went away when we moved some mills to a different building. I believe it was a transient drop in pressure.

If it continues to happen regularly, you could consider a local reservoir of compressed air with a backflow valve to buffer any pressure drops.

[[Ke...]]

Well came in today and was running machine fine till just about 1pm on the very last feature of the program it stopped.

Apparently there has been a problem with the air compressor and they came in to fix it today. I was missed in the notification of this. 🙄

So when pressure dropped machine shut off.

Compressor up now and all better 90 psi and running fine.

[[Er...]]

Please sign in to view this quote.

Haha yes, this can drive you beyond insanity 😃