Table files

[[Cl...]]

I'm outputting the Characteristic/Feature/Header table files to a folder on the network
to later be used in Datalyzer. Only the Characteristic table files are being outputted?
Why won't the Feature & Header files output?

[[Ri...]]

You have to set the output variable for those files as well.

[[Cl...]]

That screen shot was from my planner, just to show you what I was talking about.
Here is the actual Name definitions for output files for the program in question.
I have the output variables set.

[[Cl...]]

Never mind, figured it out.

[[Ri...]]

Lol. They are all named the same. I've done that before.

[[Cl...]]

The problem is, they are going to separate folders. Datalyzer needs
the three of them to be in the same folder. That I don't know how to do.

[[Ma...]]

Please sign in to view this quote.

Could you not just remove the _chr, _fet and so on after the first Rev_B in the directory and put it at the end before .txt?

[[Cl...]]

Tried that, doesn't work.

[[Cl...]]

This will sent them to the same folder:
"T:\DMR\CMM Data\113196_Op-30_Rev_B_datalyzer\"+ getRecordHead("planid")+ getRecordHead("partnbinc")+"_hdr"+".txt"

So you replace the chr/fet/hdr with the folder name (datalyzer) for all three lines.

[[Cl...]]

Please sign in to view this quote.

Marc, you were on the right track.

So you replace the chr/fet/hdr with the folder name (datalyzer) for all three lines.

[[Ri...]]

Three samples for table files.

These are my standard strings.
Shouldn't be too hard to follow. (u_DBSWITCH is a parameter for ProLink)

Characteristics Table File
"C:\PROLINK\#QCC Table Files\"+"CMM-"+getRecordHead("dmesn")+"\"+getRecordHead("order")+"\"+getRecordHead("mfgdev")+"\"+getRecordHead("u_DBSWITCH")+"_"+getRecordHead("vda_remark")+"_"+getRecordHead("partnbinc")+"_chr.txt"

Features Table File
"C:\PROLINK\#QCC Table Files\"+"CMM-"+getRecordHead("dmesn")+"\"+getRecordHead("order")+"\"+getRecordHead("mfgdev")+"\"+getRecordHead("u_DBSWITCH")+"_"+getRecordHead("vda_remark")+"_"+getRecordHead("partnbinc")+"_fet.txt"

Printout header Table file
"C:\PROLINK\#QCC Table Files\"+"CMM-"+getRecordHead("dmesn")+"\"+getRecordHead("order")+"\"+getRecordHead("mfgdev")+"\"+getRecordHead("u_DBSWITCH")+"_"+getRecordHead("vda_remark")+"_"+getRecordHead("partnbinc")+"_hdr.txt"

Some extra info for PDF files.

PDF file “Pass\Fail” identification (“inspectionToleranceState()” determines if part passed or failed inspection)
"S:\CMM - Inspection Results & Zeiss Table Files_Vault\CMM-Inspection-PDF Files\"+getRecordHead("order")+"\"+getRecordHead  ("mfgdev")+"\"+inspectionToleranceState()+"\"+getRecordHead("u_DBSWITCH")+"_"+getRecordHead("partnbinc")+".pdf"

PDF file “Pass\Fail” identification  PiWeb
"S:\CMM - Inspection Results & Zeiss Table Files_Vault\CMM-Inspection-PDF Files\"+getRecordHead("order")+"\"+getRecordHead  ("mfgdev")+"\"+inspectionToleranceState()+"\"+getRecordHead("u_DBSWITCH")+"_"+getRecordHead("partnbinc")+"_PiWeb.pdf"

[[Cl...]]

Thanks for the help everyone, I figured it out.