[Ri...] Posted May 19, 2020 Share Posted May 19, 2020 Why not just do an unknown curve? I think you will be more successful doing it that way. Link to comment Share on other sites More sharing options...
[Ch...] Posted May 19, 2020 Share Posted May 19, 2020 I think Richard is right about the unknown contour. Link to comment Share on other sites More sharing options...
[Ke...] Posted May 19, 2020 Share Posted May 19, 2020 Please sign in to view this quote. Probably because I have only worked with CAD models, for the last 10 years, and I pretty much forgot about it 🤣 I used unknown curve, and it worked like a charm (after a little refresher) Thanks! Link to comment Share on other sites More sharing options...
[Ri...] Posted May 19, 2020 Share Posted May 19, 2020 Please sign in to view this quote. Awesome. I have used Circle in contour best fit a lot, coming from a gear background. It is a very powerful tool. Just like Curve. I have always said that Curve is the single most powerful tool in Calypso. Link to comment Share on other sites More sharing options...
[Is...] Posted May 20, 2020 Share Posted May 20, 2020 Please sign in to view this quote. Circle in contour best has the potential to be a powerful tool, however is very unstable, sometimes is not able to provide a result and the graphic is not accurate enough from my point of view. The good thing is that with enough effort you can develop a better method using PCM and curve. Link to comment Share on other sites More sharing options...
[Ri...] Posted May 20, 2020 Share Posted May 20, 2020 Please sign in to view this quote. A lot of the problems that I have encountered is due to "noise" in the filter. A heavy filter/outlier elimination is needed if the part is rough. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in