Report deviation from tolerance center

[[To...]]

Hello

I am trying to make edit a bit in the Pi-Web reports.
I would like to report the deviation from tolerance center instead of deviation from nominal value?

Does anybody have an idea of how to do this?

[[To...]]

I found out by myself

But this will give me another "problem". It is reporting that center of roundness is 0.05 and not 0.Is there any workarounds on this issue?

[[Ke...]]

Using original settings, would it help to set the tolerance to Min/Max Dimension, instead of using +/- tolerance?

[[La...]]

Roundness will never be negative, so, that would be the middle of the tolerance band.

[[Ke...]]

Please sign in to view this quote.

🤣
Sorry, I just meant for the size dimension.
Is this a special request from the "customer"

[[La...]]

Please sign in to view this quote.

Sorry, I should have specified that I was replying to the original poster. They were saying that they had a roundness tol of 0.10 and the MiddleofTolerance variable responded with 0.05. I suspect they were expecting it to be 0, not understanding that roundness would never be negative. 🙂

[[To...]]

Please sign in to view this quote.

I am aware of this that is why I wrote "problem.
it is the center of the tolerance bar, yes. But is it really in the center of the tolerance?
but that is another discussion.

I would just like to know if I can make some kind of setting which allows my to differ between normal tolerances and roundness or position.