[No...] Posted March 30, 2020 Share Posted March 30, 2020 Under CAD / Modify CAD Entities / Transformation there is an option to choose or create a coordinate system to use for the transformation. Is it somehow possible to use an existing alignment from the characteristics section here? I've clicked everywhere and everything but to no avail 🙁 What I'm trying to do is place a CAD model in an existing program that was made without one. The model is a ring with radial grooves and I need to place the symmetry line between two grooves on the axis of a rotated alignment. But its all on the offline seat and I don't know the exact rotation of that alignment (has to do with the way it was created). So I'm hoping to be able to just choose it for transformation and get all the values automatically. Link to comment Share on other sites More sharing options...
[Ma...] Posted March 30, 2020 Share Posted March 30, 2020 Hallo Norbet, hast du schon mal probiert neue Elemente anzuwählen? 'Unten gibt es doch Solide Geometrie auswählen dann auf dem CAD-Model bekannte Element anwählen, die Winkel und oder Versatz sieht du dan von Basis zum CAD. Mit den Werten dann das CAD drehen verschieben?! Hoffe habe dich so richtig verstanden?! 🙄2020-03-30_13h14_10.jpg Link to comment Share on other sites More sharing options...
[No...] Posted March 30, 2020 Author Share Posted March 30, 2020 Hallo Christian, ich weiß natürlich schon, wie ich das auch anders hinkriegen kann. Nur wäre es so viel schneller und bequemer. Ich frage mich, wozu gibt es die Funktion, wenn man dann keine existierenden KS benutzen kann? Vielleicht übersehe ich ja was? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in