[Wi...] Posted March 27, 2020 Share Posted March 27, 2020 Does anyone know if calypso offers anything like a key in feature(PC Dmis) ????? I like to add some manual checks in my programs sometime and it will prompt you like an optional stop in the program. You can add nominal and stated tolerances and a name ie cal, gagepin, micrometer etc.....it also puts them on the CMM report. Link to comment Share on other sites More sharing options...
[To...] Posted March 27, 2020 Share Posted March 27, 2020 viewtopic.php?f=13&t=891&p=6179&hilit=r ... ment#p6179 I have some other docs at home. I'll post them later. Link to comment Share on other sites More sharing options...
[Wi...] Posted March 27, 2020 Author Share Posted March 27, 2020 Thanks Tom Link to comment Share on other sites More sharing options...
[Ow...] Posted March 27, 2020 Share Posted March 27, 2020 Along with using the feature or characteristic settings editor to make it CNCvsMan, the result element may be able to do what you're wanting?? Several ways it could be done but, you might need PCM to do it. I don't have PCM anymore so I can't test it but, using Parameter Coded Measurement with para files would do it. Do you have PCM? If this can be done without purchasing an additional licence (PCM) in PC Dmis, then that's in their sales favor. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in