[Wi...] Posted March 12, 2020 Share Posted March 12, 2020 Can any of you guys and girls give me some help with a kink point? I scanned a 2d curve and used that as my feature and then recalled the 2 lines needed. It worked excellent when i first sat it up but the 2nd one i ran made my CMM almost lock up(would not compute very quickly to say the least)..... if anyone has some suggestion i would really appreciate it.. Thanks Link to comment Share on other sites More sharing options...
[Wi...] Posted March 12, 2020 Author Share Posted March 12, 2020 oops... Im trying to get the .313 and the .261 dim... Link to comment Share on other sites More sharing options...
[Ow...] Posted March 13, 2020 Share Posted March 13, 2020 Not sure why it's locking up but, I've had issues with recalled features from curves not acquiring enough points to calculate a characteristic. It's like when the feature sways too far from nominal location there's some cosine error, or something that leaves it guessing into infinity. I'd try just scanning some high density lines along the two planes and the angle and use tangents. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in