[Te...] Posted February 17, 2020 Share Posted February 17, 2020 When I create a Stylus System for a Duramax with Stylus System creator every time it comes it is rotated by 90 degrees? I am guessing that any one with a direct machine or a spectrum with only the XXT head has this same problem. How do I get the tip to import correctly? I start with none, then add the XXT, Star Probe Adapter, then the Styli in X and Y, but when I import it into to my offline seat it is always rotated incorrectly and if my styli are not the same length it is a pain to fix them. I can, but I am hoping I am just missing something. Link to comment Share on other sites More sharing options...
[Ri...] Posted February 17, 2020 Share Posted February 17, 2020 The XXT on the DuraMax (I'm fairly certain it's only the DuraMax) is rotated 90°. You can rotate the stylus system in Stylus System Creator. Select the XXT Plate, and change the Main Axis Angle to 90° (it might be -90° though). Link to comment Share on other sites More sharing options...
[Te...] Posted February 17, 2020 Author Share Posted February 17, 2020 Thanks that is the step I was missing I rotated the XXT not the adapter plate. Link to comment Share on other sites More sharing options...
[No...] Posted February 18, 2020 Share Posted February 18, 2020 I remember that I did this on the O-Inspect 322 too, but not if it was mandatory or just cosmetics. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in