[Ro...] Posted February 17, 2020 Share Posted February 17, 2020 We are getting a new ceramic calibration ball for our Contura G2 CMM. (30mm sphere). The old one has a chip. Is there anything special that I have to enter into the CMM itself when it arrives, our gaging guy mention the sphere diameter might be different. As far as I remember, all I would have to do is mount the new sphere then do a manual alignment with the Master probe. If I,m wrong or have to do anything else let me know. Thanks in advance Link to comment Share on other sites More sharing options...
[No...] Posted February 17, 2020 Share Posted February 17, 2020 In the calibration window there's an icon in the toolbar (second from the left) which opens the calibration sphere management dialog. There you can enter all the necessary parameters. Link to comment Share on other sites More sharing options...
[Cl...] Posted February 17, 2020 Share Posted February 17, 2020 Then lock that cert in a safe! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in