[Ri...] Posted January 24, 2020 Share Posted January 24, 2020 Not sure if this should be put in the Piweb reporting or here, but I have a part that has a true position call out for a hole location and has .005" Max material condition. When the report generates after the part run I get 2 lines of data with the true position. One with the true position and another with an (M) at the end. What am I looking at and why does it spit out 2 results for one feature? true position report.PNGFetching info... Link to comment Share on other sites More sharing options...
[Ün...] Posted January 24, 2020 Share Posted January 24, 2020 Confusing. You can remove it by examining the attached file I found from the forum. Link to comment Share on other sites More sharing options...
[An...] Posted January 27, 2020 Share Posted January 27, 2020 Please sign in to view this quote. The second result is the recalculated first result in relationship to the "Nominal True Position" (without MM bonus). It's important for cmk/cpk. Link to comment Share on other sites More sharing options...
[Da...] Posted January 27, 2020 Share Posted January 27, 2020 What Andreas said. Example from your top TP result: 0,00237*0,00673/0,005=0,00319 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In