[Cl...] Posted December 23, 2019 Share Posted December 23, 2019 Model will change, but feature diameter won't? Tang_Presettings.txt Link to comment Share on other sites More sharing options...
[Er...] Posted December 23, 2019 Share Posted December 23, 2019 Unless you have something that needs execution in your .para file, I recommend using readPCMFile() over runPCMFile() when only setting variable values. Reason is simply efficiency. Have you set your diameter on the feature inside Calypso to a variable, a variable that change its value depending on what .para file you read/run? To give a definite answer to your question I need to see both your feature in Calypso and your .para files. Link to comment Share on other sites More sharing options...
[Cl...] Posted December 23, 2019 Author Share Posted December 23, 2019 Link to comment Share on other sites More sharing options...
[Er...] Posted December 23, 2019 Share Posted December 23, 2019 Sure you dont have the same diameter value set in both .para files? Link to comment Share on other sites More sharing options...
[Cl...] Posted December 23, 2019 Author Share Posted December 23, 2019 Nope, just checked. Link to comment Share on other sites More sharing options...
[Er...] Posted December 23, 2019 Share Posted December 23, 2019 Ah, theres your problem, one variable is called Dia_1 and the other Dia_2. The variable name shall be same as the one in Calypso. In your case as it is now, Dia_2. So dont use Dia_1 as variable name. Only use Dia_2. And have a nice christmas! Link to comment Share on other sites More sharing options...
[Cl...] Posted December 23, 2019 Author Share Posted December 23, 2019 Yep, that did the trick! I knew one thing, it had to be something simple.Thank you for your assistance Eric. Merry Christmas! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in