[Jo...] Posted October 30, 2019 Share Posted October 30, 2019 what would be the best way to create this gage dia.? GAGE.PNGFetching info... Link to comment Share on other sites More sharing options...
[To...] Posted October 30, 2019 Share Posted October 30, 2019 Create your cone feature. Then, create a Cone Calculation, found under the Construction menu. Assign the cone feature to the Cone Calculation (Cone Addition). Select Position Definition and enter 8. This will create a theoretical circle feature with a diameter of 8. Use a Cartesian Distance to measure .12 distance from the Cone Calc feature to the plane. Link to comment Share on other sites More sharing options...
[An...] Posted October 31, 2019 Share Posted October 31, 2019 Create a bunch of theoretical lines at the circumferential line of the diameter 8 in order to achieve intersection points on the cone surface. Report the minimum- and the maximum distance of those points. Regarding dimension 2.28 Link to comment Share on other sites More sharing options...
[Da...] Posted October 31, 2019 Share Posted October 31, 2019 Not related to OP, but I'm wondering why did they put datum A on outer cylinder Ø 4.00 instead of inner cylinder Ø 3.15 Should be more stable right? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In