[Go...] Posted September 22, 2019 Share Posted September 22, 2019 Hello everyone, In your experience, is it feasible to use a rotary table to measure groove assemblies or is it better to program turns on the probe? Regards. Link to comment Share on other sites More sharing options...
[Ow...] Posted September 23, 2019 Share Posted September 23, 2019 Can you give us a picture of the part? If it's just equally spaced 2D slots, using the rotary table shouldn't be a problem. With maybe the exception of a really tight roundness spec, I really can't think of a scenario where I wouldn't use a rotary table, they're very accurate. However, the size,shape, finish, tolerance expected and how the datum axis could be set-up would play a big role in how I'd choose to measure it. Link to comment Share on other sites More sharing options...
[Go...] Posted October 2, 2019 Author Share Posted October 2, 2019 Please sign in to view this quote. I will get a photo of the part and share it, as a preliminary what is required is to measure the true position of the set of slots, only my doubt is to know what is the best strategy to measure what I mention since I have little experience in measuring those geometries Thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in