[Cl...] Posted August 13, 2019 Share Posted August 13, 2019 I am scanning a 2d curve using the CWS on my O-inspect. I not certain what exact filter setting to use? Link to comment Share on other sites More sharing options...
[Cl...] Posted August 13, 2019 Author Share Posted August 13, 2019 Found it by accident playing around with the wavelength setting, curve length /2 = wavelength. Link to comment Share on other sites More sharing options...
[Cl...] Posted August 14, 2019 Author Share Posted August 14, 2019 I have a new question regarding this post. I am recalling two 2d curves into a 3d curve. Each 2d curve length is different, so the wavelength settings for each will also be different. If I set the filter wavelength for the 2d curves before I recall them into the 3d curve, will those settings take effect in the 3d curve? Or If I need to set the filter wavelength in the final 3d curve? If so what value will cover each different 2d curve? Link to comment Share on other sites More sharing options...
[Ri...] Posted August 14, 2019 Share Posted August 14, 2019 You will need to filter after recalling your points. Link to comment Share on other sites More sharing options...
[Cl...] Posted August 14, 2019 Author Share Posted August 14, 2019 OK, but what about the wavelength setting for each 2d curve, how can I set those in the 3d curve. There is only one setting allowed? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in