[Sh...] Posted August 12, 2019 Share Posted August 12, 2019 Hello, I am having difficulty with measuring a profile of a radius of an off set bore Datum C is the maximum diameter of the bore with three different lobes. When setting up the profile characteristic using ID and Datum D no result are presented with in the frame. ThanksCapture.JPG Link to comment Share on other sites More sharing options...
[Ri...] Posted August 12, 2019 Share Posted August 12, 2019 Calypso really likes having a fully defined DRF. Either use Free-Form and create an alignment using Best-Fit, or fill in Datum D as your Tertiary Datum. Datum C is Primary, Datum D is Secondary and Tertiary. It should work correctly then. Link to comment Share on other sites More sharing options...
[Sh...] Posted August 14, 2019 Author Share Posted August 14, 2019 Would datum D then be a line thru ID and .187 Radius? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in