Calypso 6.6 install

[[Ma...]]

I'm installing Calypso 6.6 for a customer on new computers with Windows 10.

I've always done installs on computers that already have a previous Calypso version. What files will I need to bring over from the old computers to these new ones to get the correct configuration?

Mark

[[Ma...]]

Also concerned about directory path changes. Are there any changes as to where certain files are located from 6.4 to 6.6 relative to move the old files to the new computers?

Mark

[[Jo...]]

installation guide attached.

Software Install_Rev1 (002).pdf

[[No...]]

Use the backup feature in the maintenance section of the settings. This will backup all of your config except measurement plans and base alignments. I'm not sure about custom PiWeb templates etc.
I don't know of any path changes between 6.4 and 6.6

[[Ma...]]

I've done it both ways, Norbert's method and the method in what Jose posted, but the computer will not make a connection with the CMM.

Mark

[[Da...]]

Please sign in to view this quote.

Mark, can you ping CMM controller? (its IP *should* be 192.4.1.200)

[[Ma...]]

Called Zeiss and they reloaded the install. Calypso was looking for the folder in the Programs x86 directory instead of the Documents directory. If that makes sense. It probably was something I did.

Working now

Mark