[Ja...] Posted March 7, 2019 Share Posted March 7, 2019 I need to use unilateral profile. The profile is in the direction of the material only. I think I need to use "Unilateral (nominal contour inside)" on both of the profiles you see in my sketch. It is a ring shaped part. When you select nominal contour inside, it means in the direction of material right?20190307142916359.pdf Link to comment Share on other sites More sharing options...
[Al...] Posted March 8, 2019 Share Posted March 8, 2019 Yes, you are correct on all counts. Normal contour inside = removing material; Normal contour outside = adding material. Link to comment Share on other sites More sharing options...
[Me...] Posted March 8, 2019 Share Posted March 8, 2019 Yes, if you just press F1 and search the keyword "Unilateral", you will find the definition for Unilateral (nominal contour inside) is "Nominal contour and distance to the inside" Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in