[Me...] Posted January 30, 2019 Share Posted January 30, 2019 Is there a quick way of reversing the Angle Range of an Arc or Partial Circle, other than editing the start angle and positive or negative degree? Link to comment Share on other sites More sharing options...
[St...] Posted January 30, 2019 Share Posted January 30, 2019 Shawn, Click on the feature's Strategy button, then double click on the Circle Path. Here you can put a minus sign in front of the angle Range value. You may also have to adjust the start angle to what was the end point originally since you are now going in the opposite direction. HTH. Link to comment Share on other sites More sharing options...
[Me...] Posted January 30, 2019 Author Share Posted January 30, 2019 Thanks Steve. That's what I've been doing since Day 1...I thought there might be an easier method... Link to comment Share on other sites More sharing options...
[Me...] Posted January 30, 2019 Author Share Posted January 30, 2019 Not much easier but at the bottom of the feature is your start and stop. So you don't have to go through strategies. Link to comment Share on other sites More sharing options...
[Ri...] Posted January 30, 2019 Share Posted January 30, 2019 This can also be accomplished globally by going to Resources - Features Settings Editor - Strategy - Angle Range 🙂 🙂 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in