[Be...] Posted January 28, 2019 Share Posted January 28, 2019 Hi all, I've been wanting to add a programmable stop into some programs for a while, preferably with prompts to remind people to do & check certain things. I know calypso is capable, I just don't know where this option is or how to add it into my measurement plan! So could someone please point me in the right direction? Thanks in advance for your help! Link to comment Share on other sites More sharing options...
[To...] Posted January 28, 2019 Share Posted January 28, 2019 In the strategy window of a feature, there is a Programmable Stop icon. Link to comment Share on other sites More sharing options...
[Be...] Posted January 28, 2019 Author Share Posted January 28, 2019 Thanks Tom! I knew it would be a pretty straight forward solution. I appreciate it! Link to comment Share on other sites More sharing options...
[Te...] Posted January 28, 2019 Share Posted January 28, 2019 Just a warning about stops and the XXT head. Put the stop at the start of the next feature not the end of the feature. What happen to me: Had a program with a stop and then a flip of the part. Program told me to flip the part so I did, problem was that it air scanned the diameter so after I flipped the part it tried to remeasure the circle before the flip...SNAP...there went a 0.3mm probe!!! Link to comment Share on other sites More sharing options...
[No...] Posted January 29, 2019 Share Posted January 29, 2019 Please sign in to view this quote. Welcome to the club 😃 Link to comment Share on other sites More sharing options...
[Ri...] Posted January 29, 2019 Share Posted January 29, 2019 I love programmable stops... Unless you have it as part of the base alignment, and a loop is set... Then I don't like them. Lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in