[Me...] Posted October 23, 2018 Share Posted October 23, 2018 Contura 2014 - Vast XXT-RDS CAA I've figured out how to fix this issue before with an XTR but for some reason nothing is working with the RDS...I've deleted my machine several times to start over, calibrated the MasterProbe also and still nothing doing with Calypso 2018 Ver. 6.6. Link to comment Share on other sites More sharing options...
[To...] Posted October 23, 2018 Share Posted October 23, 2018 Normally, I find you don't need to do Ref Sphere Positions or Qualify Stylus for normal probes but when it comes to RDS-CAA, I have found going through all of the normal calibration and fitting position routines were necessary. Link to comment Share on other sites More sharing options...
[Me...] Posted October 23, 2018 Author Share Posted October 23, 2018 It seems as if my MasterProbe isn't calibrating correctly...Capture.PNG Link to comment Share on other sites More sharing options...
[To...] Posted October 23, 2018 Share Posted October 23, 2018 What are the values in the Stylus System tab of the CMM Configuration window. . Link to comment Share on other sites More sharing options...
[Me...] Posted October 24, 2018 Author Share Posted October 24, 2018 I've tried multiple different numbers Tom...First I used my actual machine's numbers and then I found from another post instructions to find the numbers in the User Guide, I believe they were 0.000, 55.000, 135.000. Still nothing works. Link to comment Share on other sites More sharing options...
[To...] Posted October 24, 2018 Share Posted October 24, 2018 Please sign in to view this quote. I believe those number were for a Renishaw RDS Adapter Plate. Going back a week or two ago, I had a similar issue but it was resolved after I created a new machine tab. I think the new SP is due in early November. Might be worth the wait. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in