[Cr...] Posted June 6, 2018 Share Posted June 6, 2018 Is it possible to add and qualify a ruby cylinder stylus system on our O-Inspect 322? Specifically a Q-Mark TM3-1516-B-TX or similar. Link to comment https://qualityforum.zeiss.com/topic/20798-cylinder-stylus-on-o-inspect-xxt/ Share on other sites More sharing options...
[To...] Posted June 7, 2018 Share Posted June 7, 2018 If the cylinder probe has a full radius at the bottom, it is my opinion that you could qualify it as a standard spherical radius probe. One thing to note is, the deeper that you measure along the cylindrical portion of the stylus, the further away from the radius's center point you'll be as the stylus pivots. I suggest staying as close to the end of the probe as possible when measuring. Link to comment https://qualityforum.zeiss.com/topic/20798-cylinder-stylus-on-o-inspect-xxt/#findComment-118308 Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in