Alignment names in characteristic list

[[Ma...]]

Is there a way to capture all the names of the alignments in the characteristic list?  I can generate a list of all the characteristic names, but the alignment names are not on the list.

[[Ch...]]

I have a feeling this one is buried in PCM and may require executeCode() //dangerous

I would reach out to Michael K , here is some code that may help ... https://forums.zeiss.com/messtechnik/community/viewtopic.php?p=57422&hilit=executeCode+Zeiss.Calypso#p57422

[[Ch...]]

Try this ..

 This will output them all to a .txt file in your program folder.

for i =1 to baseSystem().machine.inspection.allPCSNames.size
	coordsysnames=getParameterNamed(baseSystem().machine.inspection.allPCSNames.asArray,i).asString
	addToFile(getActualInspectionDir()+"\PCM1.txt", coordsysnames)
next i

 

I'm learning slowly ..

 

if you just want the names :

baseSystem().machine.inspection.allPCSNames

 

 

Edited December 11, 2024

[[Mi...]]

baseSystem().machine.inspection.getExistingPCS.definitionList  // usage and elements
baseSystem().machine.inspection.getExistingPCS.definitionList2 // usage and elements without ' -> '
baseSystem().machine.inspection.getExistingPCS.allMeasElementNames // only elements

bas=baseSystem().machine.inspection.getExistingPCS.definitionList
for i=1 to bas.keys.size
    el=getParameterNamed(bas,i)
        display(el.key.trim + "   ->   " + el.value.trim)
          next i

 

Edited December 12, 2024

[[Ma...]]

Thanks gentlemen, this is all very helpful!