Can I get some help with drawing?

[[Ja...]]

Hello.

Is there anyone who can help me with this drawing?

I've used only standard alignment....I have no idea how to measure it

 

I tried to set base alignment with P6 and RPS.

P6: not allowed to choose more than 3 features, so failed

RPS 321: not allowed to more than 6 features, failed.

 

1. Should I use RPS Freedom?

2. Target datum A is a center of hole...

Use working plane function to get a center of hole projected onto upside plane??

3. To measure true position 0 (2 points), what features should I inspect??

 

[[Ro...]]

If you have a bunch of these to run, i would continue to use standard alignment.

I would use a plane Line Line on the bottom side, Maybe even add in a loop (I almost always loop 2 times) and then once your machine knows the part you can scan your datum B & C later on in the program. 

The reason i would do that is your datums are 3mm holes, so you're probably going to be using a 1mm styli, and those aren't very durable for poking around and finding stuff.