Jump to content

Measurement of the length cone


---
 Share

Recommended Posts

---

Hello everyone,

I need your help in order to measure the length of a side of a cone. I received a new drawing from the customer and there is a 0.5mm length call out which is from the intersection of the through hole and a 90° angle to the intersection of the 120° angle and the 90° angle as you can see on the drawing. Thank you in advance

image.png

Link to comment
Share on other sites

  • 2 weeks later...
---

Try this, create a Cone calculation from the cone to the top surface, select "Shell" for the cone.

Then create another cone calculation from the cone to the cylinder, select "Shell" for the cone.

Insert a Caliper Distance and select both of the cone calculations, set them too "maximum".

There should be an option to measure distance with "3d".

Link to comment
Share on other sites

 Share

×
×
  • Create New...