[Do...] Posted August 12 Share Posted August 12 Is it possible to program and use Profile of a Line if you do not have the Calypso Curve option? I am running an older system and it does not have the scanning capabilities or the ability to create 2D & 3D curves. Link to comment Share on other sites More sharing options...
[Ma...] Posted August 12 Share Posted August 12 For line profile you can use only 2d and 3d curves unfortunately. Alternative can be using "Form" with constrains and doubling it's value i think. Link to comment Share on other sites More sharing options...
[Ri...] Posted August 12 Share Posted August 12 If you have Calypso 2023+ with the new GD&T engine you can use other standard geometries to evaluate Line Profile. Otherwise, no you cannot. 1 1 Link to comment Share on other sites More sharing options...
[Ha...] Posted August 12 Share Posted August 12 It is not possible to do a line profile without curve for Calypso versions 7.4 and older. You will need to use space points as a substitute for the line profile characteristic. https://portal.zeiss.com/knowledge-base?id=2495545 Link to comment Share on other sites More sharing options...
[To...] Posted August 13 Share Posted August 13 (edited) The link does not address alignments, especially if the DRF is not totally constrained. Edited August 13 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in