[Do...] Posted Tuesday at 02:51 PM Share Posted Tuesday at 02:51 PM Is it possible to program and use Profile of a Line if you do not have the Calypso Curve option? I am running an older system and it does not have the scanning capabilities or the ability to create 2D & 3D curves. Link to comment Share on other sites More sharing options...
[Ma...] Posted Tuesday at 03:13 PM Share Posted Tuesday at 03:13 PM For line profile you can use only 2d and 3d curves unfortunately. Alternative can be using "Form" with constrains and doubling it's value i think. Link to comment Share on other sites More sharing options...
[Ri...] Posted Tuesday at 04:34 PM Share Posted Tuesday at 04:34 PM If you have Calypso 2023+ with the new GD&T engine you can use other standard geometries to evaluate Line Profile. Otherwise, no you cannot. 1 1 Link to comment Share on other sites More sharing options...
[Ha...] Posted Tuesday at 09:59 PM Share Posted Tuesday at 09:59 PM It is not possible to do a line profile without curve for Calypso versions 7.4 and older. You will need to use space points as a substitute for the line profile characteristic. https://portal.zeiss.com/knowledge-base?id=2495545 Link to comment Share on other sites More sharing options...
[To...] Posted Wednesday at 11:19 AM Share Posted Wednesday at 11:19 AM (edited) The link does not address alignments, especially if the DRF is not totally constrained. Edited Wednesday at 11:21 AM Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in