Upgrade to 8.0

[[Li...]]

I work at a machine shop that has 6 CMM's 3 Duramax, 2 Contura's and a Prismo.  The oldest one has been here since 2011. Each have a great number of programs.  For some programs there are multiple programs to very certain machining ops.  

My concern is, I just upgraded the Prismo to 8.0.  When I started looking at the programs, I noticed that the file path for the output of the data is gone. [Resources>>Name of output files>>...for this Measurement Plan] We send data for all parts to a network location to a folder that is specific for the part number being ran no matter what CMM it runs on. 

These all run on older versions of Calypso 6.6 and 6.8 so they still use the old "presentation" printout.  Now that is gone in 8.0 because Pi-Web is the go to. 

This is an issue. Luckily the Prismo does have that many programs, but its still upwards of 100 with some have several programs within a certain part number.  

I'm going have to open every single program and re-define the output of the report to the desired network location.  

[[Da...]]

I found this old post:

qualityforum.zeiss.com/topic/4454-curve-piweb-graphics-element/?do=findComment&comment=13212

Hope this helps you.

Edited Friday at 08:59 PM