Jump to content

toe angle


Recommended Posts

i have a plane in the middle of two planes it does not matter how I do it, I get a  positive result if both planes go out or in its still positive. Me personally i can look at it and say its towed in or out but the engineers need to see on the angle between features as a positive negative. they insist on negative toe out and positive toe in

Link to comment
https://qualityforum.zeiss.com/topic/24479-toe-angle/#findComment-138437
Share on other sites

As Martin stated, you would need to have an alignment for the Datum or what you want to call zero for the Angle (the reference). Then the Plane (I assume a Symmetry Plane) in the middle will need to live inside of that alignment instead of the Base Alignment. There, you will either report the A1 or A2 angle (it depends on which space axis you want the angle reported from). That will give you a ± angle, and not just an absolute. 

Link to comment
https://qualityforum.zeiss.com/topic/24479-toe-angle/#findComment-138461
Share on other sites

A1` A2 will tell me if it is positive or negative but is not the actual angle from the datum it is totally different from the actual angle. if i use results element with getActual("IntA G1").angle will that give me what i am looking for my problem is i am in Texas the parts and machine are in Missouri I'm having difficult time testing results sorry if i can not type

Link to comment
https://qualityforum.zeiss.com/topic/24479-toe-angle/#findComment-138469
Share on other sites

×
×
  • Create New...