[An...] Posted yesterday at 01:17 PM Share Posted yesterday at 01:17 PM Our computer for one of our CMMs died yesterday and we are trying to connect an offline programming laptop to the CMM. The laptop has Calypso and I downloaded and activated a full Claypso license, it is no longer an offline seat of Calypso. The issue we have right now is that the laptop cannot make a connection to the CMM and I am not able to create a new CMM in Calypso. Any help would be appreciated! Link to comment Share on other sites More sharing options...
[na...] Posted yesterday at 02:01 PM Share Posted yesterday at 02:01 PM Please sign in to view this quote. Offline license alone is not enough to run CMM. If you have USB dongle with license file backup from old one, then you can transfer it to laptop. Link to comment Share on other sites More sharing options...
[Ke...] Posted yesterday at 02:02 PM Share Posted yesterday at 02:02 PM You must set IP address for NIC card that is plugged into the Zeiss machine must be 192.4.1.199, submask 255.255.255.0. after setting up communication network. don't forget to bring dongle usb device from your old pc to plug into your laptop. Link to comment Share on other sites More sharing options...
[An...] Posted yesterday at 02:22 PM Author Share Posted yesterday at 02:22 PM I do have the USB dongle on the laptop and I have the online license activated. I should be good to go but its only showing ACCURA1_RDS which is the name of our offline machine. It wont let me add our actual ACCURA, the add button is greyed out. Link to comment Share on other sites More sharing options...
[Lu...] Posted yesterday at 02:28 PM Share Posted yesterday at 02:28 PM Hi Andrew, To create a new machine tab, type in a new name and then hit ENTER. This will activate the "Add" button. https://portal.zeiss.com/knowledge-base?id=2837053 Link to comment Share on other sites More sharing options...
[Ke...] Posted yesterday at 02:51 PM Share Posted yesterday at 02:51 PM you have to name your machine name first then keyboard Tab it will show ADD Link to comment Share on other sites More sharing options...
[Za...] Posted yesterday at 03:49 PM Share Posted yesterday at 03:49 PM Additionally, you'll need to review your licenses, either in Zeiss License Management Tool, or Extras > Settings > Misc > Licenses to see if you have a CNC license. if you do not have one, that seat of CALYPSO cannot run a CMM Link to comment Share on other sites More sharing options...
[Ma...] Posted yesterday at 05:08 PM Share Posted yesterday at 05:08 PM What i saw on our setup, we had definitions in "hosts" file. Somewhere should be setted ip address for your machine, because you have to set it on your pc. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in