Measure Points / Subsequent Evaluation

[[Sh...]]

I'm having an issue with Measure Points when running Subsequent Evaluation.  It's taking about 5-6 minutes to load and run a single .zmp and I think it might be tied to a 2d Curve because I'm using Recall Feature Points in features generated from the curve.

Anyone familiar with this or have any solutions?

[[Ch...]]

Shawn,

 

 howdy, are meas points on local hard drive or network ?  I've had similar issues when they are on network.

Shouldnt take this long though unless you have a lot of curves/freeform with a lot of points and Ca evaluations.

[[Sh...]]

i've tried both network and local, unfortunately didn't matter 😞

[[Cr...]]

I found if you have a lot of files (or they are big files) in the idmeaspoints folder within the program folder it will slow down the loading of measured points. When this happens, I create a new folder within the measurement plan folder and move older files from idmeaspoints into that folder. If I ever need to load measured points from a part that I've moved, I'll just move it back into the idmeaspoints folder.

[[Pa...]]

In addition, a measurement plan with LOTS of points or with graphic displays absolutely take a much longer time to process.