Automatic Scanning Error - Cannot check online sensor movement

[[Ju...]]

Hello everyone,
I am looking for a solution.
I used the record button to create this code, which is supposed to scan automatically.

gom.script.atos.set_acquisition_parameters(measurement_temperature=20.0)

GOM_MMT_RETRIES = 10
GOM_MMT_ERROR_CODES = ['MPROJ-0037']
while True :
    try:
        gom.script.atos.insert_scan_measurement ()
    except RuntimeError as ex:
        if GOM_MMT_ERROR_CODES and not ex.args[0] in GOM_MMT_ERROR_CODES : raise
        GOM_MMT_RETRIES -= 1
        if GOM_MMT_RETRIES <= 0 : raise
    else:
        break

Unfortunately, I get the following error message when I run it automatically:

RequestError: MATOS-S032: Cannot check online sensor movement.

  File .... , line 29, in <module> gom.script.atos.insert_scan_measurement ()

 

What could be the reason for this and how can I fix the problem (I am using Zeiss Inspect 2026)?

 

Best regards,

Jure Baloh

Edited 9 hours ago

[[Na...]]

Hi Jure,

is there a reference point detected in the measuring volume?

[[Ju...]]

Hey Nanno,

yes, in live-Mode you can see a few green points.